my Dayton daetx25vt excitor lost it adhesive ring. how to replace diy or otherwise

If your Dayton DAEX25VT exciter has lost its adhesive ring, fear not—there are several DIY solutions to get it back in action:

—

### 🛠️ DIY Replacement Options

**1. 3M VHB Tape (Very High Bond):**
The original adhesive is a 3M VHB ring, known for its strong bond. You can replicate this by purchasing 3M VHB double-sided tape. Cut it to match the exciter’s base. Ensure both the exciter and mounting surface are clean and dry before application to achieve optimal adhesion. citeturn0search0

**2. Two-Part Epoxy:**
For a more permanent solution, a two-part 5-minute epoxy can be used. Apply it carefully to avoid excess that could interfere with the exciter’s operation. This method provides a strong bond but is less forgiving if you need to reposition the exciter later. citeturn0search7

**3. Replacement Adhesive Rings:**
Some users have inquired about purchasing replacement adhesive rings. While specific replacement rings may not be readily available, using the aforementioned 3M VHB tape is a practical alternative. citeturn0search3

—

### 🔄 Alternative Mounting Methods

**Screw Mounting:**
The DAEX25VT has four mounting holes. While these can be used for additional security, over-tightening screws can dampen the exciter’s vibrations, potentially affecting sound quality. If you choose this method, use it in conjunction with adhesive and avoid excessive pressure. citeturn0search7

—

### 🧼 Surface Preparation Tips

– **Cleanliness is Key:** Ensure both the exciter base and the mounting surface are free from dust, oils, or residues. Use isopropyl alcohol for cleaning.

– **Dry Surfaces:** Allow cleaned surfaces to dry completely before applying adhesive.

– **Proper Pressure:** When applying the exciter with new adhesive, press firmly to ensure full contact and bond strength.

—

### 🛒 Where to Find Materials

– **3M VHB Tape:** Available at hardware stores or online retailers like Amazon.

– **Two-Part Epoxy:** Look for brands like J-B Weld or Loctite at local hardware stores or online.

—

If you’re interested in a visual guide on mounting exciters, this video provides helpful insights:

videoIMS™ Exciters make Mounting and RE-mounting Easy!turn0search13

Let me know if you need further assistance or have other questions!